Categories

EXAMINATION LAMP

Item No.: JCH-01
Examination lamp of JCH model is specially designed for mini operating room, outpatient examination or doctor’s office. It has the following characteristics.
INQUIRY
Description Installation & Maintenance Packing List


Ⅰ. Characteristics and use of product
Examination lamp of JCH model is specially designed for mini operating room, outpatient examination or doctor’s office. It has the following characteristics.
* Small lamp holder of only 75mm diameter which does not block off the sight line of doctor and nurse
* Flexible cross arm of 700mm long which can be positioned optionally and can provide shine to the farthest place at difference angle
* Electronic transformer which provides step less brightness control and meets requirement of different brightness
* Portable pedestal which assures the lamp to be used in a farther place
* Filter glass which makes light more pure and soft, like natural light
Examination lamp of JCH model can be used for examination of facial feature department, obstetrics and gynecology department and outpatient service department, or small surgery. It can also be used as supplementary lighting of operating room or lighting for doctor’s office.
Ⅱ. Technical parameter

No.

Item

JCH01(HALOGEN)

JCH02(LED-WHITE)

1

Color temperature

3000K—6000K

2

Illumination

50cm≥5000lx

50cm≥10000lx

3

Power source

a.c. 220V±22V   50Hz±1Hz

4

Power consumption

35W

3W

5

Bulb

Halogen luminescence bulb 12V/35W

LED 3W

6

Facular diameter

φ100mm-φ250mm

Ⅲ Bill of components
The Examination lamp can be dismantled into three parts: 1) lamp body, 2) vertical shaft, and 3) pedestal. The lamp body and vertical shaft are packed with foam material into one carton, pedestal is packed into another carton, totally two cartons.
There some attachments to the lamp including one copy of certificate of compliance, operating instruction and packing list respectively, and one spare bulb. The attachments are packed in the carton of lamp body.

1. Installation
As illustrated, please insert vertical shaft (part 2) into pedestal mightily (part 1),then insert lamp body into vertical shaft, finally mount and screw down the screw into the bolt hole on plug of lamp body. The installation is completed.
2. Usage
1) Movement of the entire lamp
Please hold the vertical shaft by hand(s) and push it.
2) Adjustment of lamp holder position
Please hold lamp arm (part 7) by one hand, hold vertical shaft by another had, and pull lamp holder.
3) Brightness adjustment
Please switch on lamp arm and turn the knob (part 6). Turning the knob clockwise means increase in brightness while anti-clockwise means decrease.
4) Switch off
Please turn the knob anti-clockwise till a sound of “dah” is heard. The switch on arm is for temporary use of turn-off.
5) Replacement of bulb
Please dismantle front shroud (part 8) anti-clockwise, pull out the damaged bulb and replace it with a new one, and finally mount the front shroud.

Examination Lamp   in two boxes

NO.

Item

QTY

1

Lamp Head Body

1

2

Vertical Shaft

1

3

Pedestal

1

4

Qualification Certificate

1

5

Instruction Manual

1

6

Packing List

1

After opening packaging box, please double check content with packing list. Please immediately contact us if any items is missing.